Tight Woven Mesh Safety Vest w/o Reflective L/XL
This safety vest is Non-ANSI (American National Standards Institute) rated, however, it does meet the standards of the Manual on Uniform Traffic Control Devices (MUTCD). The MUTCD is issued by the Federal Highway Administration (FHWA) of the United States Department of Transportation (USDOT). What does that mean? It means this safety vest conforms to the MUTCD standards. The A1500/A1501 safety vests are to be worn by those working away from traffic areas or where traffic does not exceed 25 MPH.
The A1500/A1501 safety vest is made with 100% lightweight tight woven polyester mesh fabric. It has black trim around the edge of entire vest with one black elastic band on each side, to help secure the vest in place.
The A1500/A1501 Tight Woven Safety Vest Without Reflective is available in size L/XL only.
With no reflective striping, this safety vest provides a large area on the front & back for screen printing your organizations or company logo(s). The tight mesh helps improve the screen printing quality and allows for more detail to be printed, compared to other more open mesh vests.
Click here to learn about screen printing your logo or other personalized identification on this vest.
3A Safety (Manuf. Part # A1500 | A1501)
- 100% polyester
- Lightweight tight woven mesh fabric
- (1) 3” long hook & loop front closure
- Black cotton trim
- Elastic on each open side
Pockets: (no pockets)
- Non-ANSI Rated | Conforms to MUTCD standards