ANSI Class II - Heavy Duty Safety Vest -Zipper

Item #
As Low As $21.88
The Radians SV59Z Type R | ANSI Class 2 vest is a heavy-duty contractor Surveyor’s vest with zipper closure and large back “plan” pocket.

Value Shopping Guide

More Information

This ANSI Class 2 heavy duty safety vest is high visibility and is the ideal choice when you need a surveyor vest made to the best standards.  This mesh hi vis vest model from Radians features a heavy-duty zipper front enclosure and a large back “plan” pocket. You’ll also appreciate the reinforced wear points and tough pockets for years of use. Made for breathability, this surveyor safety vest with back pocket will meet not only the ANSI requirements for the job but your scrutinizing preferences as well.

The SV59Z-2 Class 2 safety vest features a heavy-duty zipper closure and the webbing reinforcement enhances the heavy duty hi vis vests durability. The SV59Z-2 is engineered with multiple pockets in strategic locations for easy access and storage of your most essential tools that you need to be close at hand.  The lower pockets are configured to hold a conventional tablet or iPad.  The SV59Z-2 includes a mic tab at left shoulder and grommets at the neck for tool keepers and lanyards.  To keep you protected in low light conditions, the SV59Z-2 features 2-inch wide glass bead reflective tape.

This heavy-duty safety vest is 100% polyester knit mesh with solid fill front pockets.  It’s offered in a full range of sizes from Small to 5X and is available in either hi-visibility orange or hi-visibility lime color.

The SV59Z-2 surveyor safety vest with back pocket can also be custom screen printed.

Stand out and be seen with this quality Radians RadWear SV59Z-2

Meets Class 2 ANSI/ISEA 107-2015 | Type R Standards

Safety vest with iPad pocket made by Radians Inc. (Manuf. Part # SV59ZG/SV59ZO)

Performance Features:

  • Woven Fabric Bias Edging
  • Heavy Black Webbing Reinforcement
  • Silver 2” Glass Bead Reflective Tape
  • Heavy-duty Zipper Front Closure
  • High Quality Grommets at Neck for Tool Keepers/Lanyards


  • 1 Radio/Cell Phone Pocket w/Clear ID Badge Holder at Right Side
  • 1 Split Pencil/Tablet Pocket at Left Side
  • 2 Outside Lower Pockets w/Top Cover
  • 2 Inside Lower Patch Pockets
  • Plan Pocket in Back (two-layer back pocket, width of vest back, reinforced snap closure on both sides.)


  • 100% Polyester Mesh (vest)
  • 100% Polyester Solid Twill (pockets)
Write Your Own Review
You're reviewing:ANSI Class II - Heavy Duty Safety Vest -Zipper SV59ZG-Lime/SV59ZO-Orange
Your Rating