Tight Mesh Safety Vest w/Horizontal Reflective - L/XL

Item #
A1300-Orange/A1301-Lime
As Low As $4.99
Economical, tight mesh vest with horizontal reflective stripes. Great for screen printing your company logo or custom identification, front & back.
3A Safety

Value Shopping Guide

More Information
Description

The A1300/A1301 is a Non-ANSI rated vest meaning it provides minimum visibility. 

Although this safety vest is Non-ANSI rated, the A1300/A1301 safety vest with its minimum visibility does meet the standards of the Manual on Uniform Traffic Control Devices (MUTCD).  The MUTCD is a document issued by the Federal Highway Administration (FHWA) of the United States Department of Transportation (USDOT).  What does that mean?  It means MUTCD recognizes the A1300/A1301 safety vest is designed to be worn in areas away from traffic or in areas where traffic does not exceed 25 MPH.   

This safety vest is made of lightweight “tight woven” mesh with black cotton trim.  It has two 1” reflective stripes at the mid-torso area of the vest and an elastic band on each side of the vest.

If having a lightweight safety vest with horizontal reflective material is what you’re looking for, then the A1300/A1301 is the vest for you.  Available in size L/XL only.

Because of the horizontal stripes, there is a large area both front and back, that we can print on for you.  Click here to learn about screen printing your logo or other personalized identification on this vest.

Manufactured by 3A Safety (Manuf. Part # A1300 | A1301)

Performance Features:

  • 100% polyester
  • Lightweight tight woven mesh fabric
  • (2) 1” wide horizontal reflective stripes
  • (1) 3” long vertical hook & loop front closure
  • Black cotton trim
  • Open sides w/black elastic band

Pockets: (no pockets)

Classification:

  • Non-ANSI Rated | Conforms to MUTCD standards
Write Your Own Review
You're reviewing:Tight Mesh Safety Vest w/Horizontal Reflective - L/XL A1300-Orange/A1301-Lime
Your Rating
You may also like!